|
 |
CHRIS HEINTZ ON AIRCRAFT ENGINES:
"Overpowering an existing aircraft is the easiest way to achieve short take-off performance (with enough power anything will take-off in a short distance!), but this requires a lot of fuel for acceptable endurance, and is an expensive, heavy, and inefficient way to obtain STOL performance. it also does not provide good slow flight or payload due to the heavier engine weight and/or fuel load requirement. My experience tells me that I need 60 to 100 hp for a two-seat aircraft, or 150 to 200 hp for a four-seater capable of carrying 1,000 lbs. As an airplane designer and builder (and not an engine manufacturer), I design aircraft around existing and readily-available engines. For maximum flexibility and to keep costs low, an aircraft must be designed to accommodate different engine types so that owners can choose among existing (and new) powerplants".
The high-lift features of the design give the STOL CH 801-HD its excellent short take-off and landing capability. The four-seat STOL CH 801-HD was designed to provide excellent STOL performance without the need for excessive power: Overpowering an existing aircraft is the easiest way to achieve short take-off performance (with enough power anything will take-off in a short distance!), but this requires a lot of fuel for acceptable endurance, and is an expensive, heavy, and inefficient way to obtain STOL performance, and does not provide good slow flight or payload due to the heavier engine weight and fuel load requirement.
|
While all aircraft are designed within certain power and engine weight guidelines, Chris Heintz does not design his aircraft "around" a particular engine - to maximize the customer's choice of installed powerplant. Recommended power for the STOL CH 801-HD is 160 to 220 horsepower, up to 400 lbs. installed weight.
|
 |
 |
That said, designer Heintz recommends the Lycoming O-360 engine as the standard powerplant for the STOL CH 801-HD: "The O-360 is very proven, dependable and readily available," Heintz has stated. "While the initial purchase price is significant, the price actually compares very favorably with other engines when factoring in the long life of the engine."
. |
Over the past 65 years, Lycoming has produced more than 260,000 piston aircraft engines. With a reputation for performance and reliability, Lycoming piston engines power more than 85% of the new general aviation aircraft produced worldwide.
|
O-360 Engine Series:
|
 |
|
NEW ENGINES FROM AERO SPORT POWER |
 |
Over the last few years, numerous STOL CH 801 owners have installed an engine from Aero Sport Power and have been very satisfied with their choice: The engines are powerful (IO 375 = 205 HP) and can be operated on auto fuel. Customer support from the manufacturer has also been excellent - an important factor!
|
All New Aero Sport Power Engines Include the Following:
|
  |
Click on engine pictures to visit engine manufacturer websites
 Lycoming |
|
Regarding alternative engines for the STOL CH 801, designer Chris Heintz has stated:
|
Most custom engine installations require a lot of work and often "troubleshooting" to properly install, and may not provide the expected performance and reliability. Designed as a sport utility kit aircraft, top speed of the STOL CH 801-HD is limited by its high-lift design features, and more power will not yield significant top speed gains.
Zenith Aircraft Company stocks engine mounts and accessories for some other engine types but does not provide support for such installations.
The above resources are provided for informational purposes only. Alternative engines will affect performance, specifications and flight characteristics of the aircraft. Also, the weight and balance of the aircraft may be adversely affected by alternative engines, and the original fuel system may not be adequate or suitable for some engines. Most alternative engines will require a custom engine mount and engine cowl. Zenith Aircraft Company does not manufacture or directly support engines nor their installation.
More Info:
Zenith Aircraft Company stocks engine mounts and accessories for some other engine types but does not provide support for such installations.
The above resources are provided for informational purposes only. Alternative engines will affect performance, specifications and flight characteristics of the aircraft. Also, the weight and balance of the aircraft may be adversely affected by alternative engines, and the original fuel system may not be adequate or suitable for some engines. Most alternative engines will require a custom engine mount and engine cowl. Zenith Aircraft Company does not manufacture or directly support engines nor their installation.
More Info:
- Click here for more details on Firewall Forward Packages (FWF) available from Zenair.
